13 Years Factory wholesale Personlized Products FN-G801 FOND 1W 12V Brightness Underground Led Lights White CE Rohs Aluminum 2 Years Warranty in Bangalore Manufacturer in Greece

Short Description:

Details Light Source: LED Item Type: Underground Lights Warranty (Year): 2 Input Voltage (V): AC12 Lamp Luminous Flux(lm): 100 Lamp Luminous Efficiency(lm/w): 100 Color Temperature (CCT): Warm White Working Temperature (℃): -25 - +45 Lamp Body Material: Aluminum IP Rating: IP67 Place of Origin: Ningbo, China Brand Name: FOND Size: Dia.52 x H90mm CCT: warm white,normal white,cool white LED Light Source: Epistar /Bridg...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
13 Years Factory wholesale Personlized Products FN-G801 FOND 1W 12V Brightness Underground Led Lights White CE Rohs Aluminum 2 Years Warranty in Bangalore Manufacturer in Greece Detail:

Details

Light Source:

LED

Item Type:

Underground Lights

Warranty (Year):

2

Input Voltage (V):

AC12

Lamp Luminous Flux(lm):

100

Lamp Luminous Efficiency(lm/w):

100

Color Temperature (CCT):

Warm White

Working Temperature (℃):

-25 - +45

Lamp Body Material:

Aluminum

IP Rating:

IP67

Place of Origin:

Ningbo, China

Brand Name:

FOND

Size:

Dia.52 x H90mm

CCT:

warm white,normal white,cool white

LED Light Source:

Epistar /Bridgelux

Certification:

CE, RoHS

Lamp Power (W):

1

Working Lifetime (Hour):

 50000

CRI (Ra>):

80

Operating Voltage (V):

12

 

Specifications

4fggr.png

 

Description
Square, garden and so on need not only in the darkness of night lighting, also need to all kinds of decoration to beautify the them. In darkness, but also to save energy, we can’t put the high-power lamps light up one night, because that would waste of electricity. So in the night, people passing the garden or take a walk in the garden, light mini buried lights is enough to make people see the road don’t wrestling. Not only beautify the garden, but also achieved the purpose of energy saving.

 

Applications 
Use in the garden, squarefacadespark, palaze, office, bar, hotel, exterior of building, round column, road and other outdoor lighting
44yh.png

 

Competitive Advantage

Colour: white, blue, amber, etc

We can offer the most popular colors: amber. It will make you look more intoxicating courtyard.

Stainless steel material is designed, make lamp shell so shine forever.

IP67 waterproof function, greatly improving the service life of the lamp.

All sorts of color transform model, let you have more choices to embellish your garden.

 

Why are you choicing us?

 

Ningbo Fond-lighting Company Ltd. has advanced production equipment and testing instruments.

Right now, the new LED flood light and Led underwater light have successfully won a place in the market.

And, the products of our company has been approved by GS, CE, EMC, RoHS, REACH, PAHS, SAA, UL, DLC which is

surperior to the peer company. “High starting point, high quality, high pursuit” is our purpose.

The principle of our company is  providing  users with good quality products and prompt after-sales service in all

directions.

 FAQ

1. How about our company?

We have been specializing in LED flood light, LED high bay light, LED street light, LED underwater light, LED underground light for 10 years.

2. Do you accept OEM order?

Yes, OEM for our LED lights are acceptable.

3. How long is the delivery time?

It ‘s about 15-20 days.

4. What’s your payment terms?

30% TT IN ADVANCE,70% BEFORE SHIPPMENT, OR L/C.


Product detail pictures:


Related Product Guide:

13 Years Factory wholesale Personlized Products FN-G801 FOND 1W 12V Brightness Underground Led Lights White CE Rohs Aluminum 2 Years Warranty in Bangalore Manufacturer in Greece , The product will supply to all over the world, such as: , , ,


  • Shenzhen Ledcolorlight Co.,Ltd is a leading DMX LED products and solutions provider with professional technology, excellent team, perfect management system and enterprise culture.
    Our products mainly include entertainment lighting,architectural lighting and led controller.Our DMX led vertical tube,DMX 3D ball,DMX RGB strip light,DMX module light and DMX digital bar are popular products for nightclub,stage,and theater.Our DMX underwater/underground light,DMX digital tube DMX wall washer,and DMX flood lights are widely used for theme park, hotel, business center, city lighting ect.
    If you are interested,pls feel free to contact with me by Skype:darren9226



    Arduino Tutorial: LED Sequential Control- Beginner Project
    Inexpensive Arduino Starter Kit: http://amzn.to/1CqGEuB

    Link to Arduino IDE: https://www.arduino.cc/en/Main/Software

    Link to Sketch for this project: https://www.dropbox.com/s/bivwdnehp7ln1iq/Sequential_blinking.ino?dl=0

    Today I am going to show you guys a very simple arduino project for beginners. We’re going to get three different LEDs to turn on and turn off in a simple sequence, like you see here.

    For this, you’re going to need an Arduino Uno or similar Arduino board, a breadboard (preferably with a positive and negative rail like this one), four breadboard jumper wires, a USB cable to for the Uno, three LEDs of different colors(here we are using Blue, Red and Green) and 3 220ohm resistors. Now we’re using 220ohm resistors, because they seem to work best with the LEDs we have- but you could use different resistors, depending on your LEDs and your circuit. I’ve put a link to an inexpensive arduino kit that contains all these components in the description below, in case you’re looking to get an arduino uno and all the basic components for this tutorial.

    So lets first setup the hardware. The first step is to establish a common ground. To do this, use a jumper wire to connect the Ground pin on the arduino to the negative rail on the breadboard. This allows all the LEDs to use the ground pin on the arduino. Now we’ll insert the resistors into the breadboard. Space the resistors out with one leg connected to the the negative rail. Now its time to insert the LEDs. Before inserting the LEDs, its important to note that the longer of the two leads on most through-hole LEDs is the positive leads. Connecting it the wrong way, will cause this circuit to not work. Connect the negative lead of the LED to the horizontal rail on which the resistor is connected and connect the positive lead to an adjacent rail. Repeat this process for all three LEDs. Now its time to complete the circuit. We are going to use output ports 13, 12 and 11 for the input signal. Connect the positive lead of the LED on the right to pin 13, the LED in the center to 12 and the LED on the left to pin 11. The circuit is now complete. Power on the Arduino Uno by connecting it to your computer using the USB cable. The LEDs on the board turn on and the board powers up.

    Before we work on our sketch, make sure to download the Arduino IDE for your specific operating system. I’ll leave a link to where you can download this software, in the description below. Once you’ve downloaded and installed the arduino IDE, go ahead and download the Sketch to run this program, using the link I’ve put in the description.

    https://www.dropbox.com/s/bivwdnehp7ln1iq/Sequential_blinking.ino?dl=0

    Open the downloaded file. The program first creates 3 variables. LED1, LED2 and LED3. This allows us to change the output pins, without having to modify the entire program. The code in the setup part of the program tells the arduino that pins 13, 12 and 11 will be outputs. The loop portion of the program is where the actual instructions live. The first three digitalwrite functions turn on one LED at a time with a 200ms delay between each of them turning on. The next three digitalwrite functions turn off the leds with a 300ms delay between each LED. Now you can change the delay between each LED to change the rhythm of the LEDs turning on and off. I’ve found that using 200ms and 300ms gives it a nice smooth rhythm. Now you’re ready to upload the program to the board. Now click on the Tools tab of the Arduino Window, make sure the Arduino Uno is selected as your board and make sure you select the COM port your board is connected to. Most of the times there will be one COM port available and that will be the one you need to select. Click on the upload button on the top left hand corner of the screen to upload the program to the Uno. A green progress bar on the lower right hand corner will indicate upload progress. And unless any errors appear in the black message bar at the bottom of the screen, your board should now be running the program and the LEDs should be turning on and off like you can see here.

    Hope this tutorial was useful. Please hit LIKE for more Arduino tutorials and subscribe to stay tuned.


    5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us