15 Years Factory wholesale FN-H003 CE RoHS 120W SMD 2835 led warehouse lighting fixtures Factory in Provence
15 Years Factory wholesale FN-H003 CE RoHS 120W SMD 2835 led warehouse lighting fixtures Factory in Provence Detail:
FN-H003 CE RoHS 120W SMD 2835 led warehouse lighting fixtures
LED High Bay Light Features:
1.LED High Bay Light is the most strong product of FOND-LIGHTING;
2.Very complete certification: CE RoHS;
3.Widely sold to European market, north America, South America, Asia,etc.
4.Widely used in workshops, hotels, stadiums, gas stations, highway toll stations, supermarkets, exhibition halls and other indoor locations.
|The Specification of explosion-proof led light|
|Replace HID Lamp||70-100W||100-150W||200-300W||300-400W||400-500W|
|Net Weight||2kg (4.4lbs)||2.5kg (5.5lbs)||4.3kg (9.46lbs)||5.4kg (11.88lbs)||7kg (15.4lbs)|
|LED Power Supply||Mean Well driver or High quality driver|
|AC Input||AC85~265V (AC375V available on request)|
|DC Input||DC80~400V (DC12V, DC24V and other input available on request)|
|LED Light Source||Macro / Bridgelux / Epistar|
|Beam Angle||60° / 120° Both available|
|Color Rendering Index||≥Ra75|
|Housing||Copper Free Aluminum|
|Brand of Products||FOND|
Installation Process of led warehouse lighting fixtures
1. Fasten the light directly to mounting stem or mounting surface with screws through the 5-mm mounting hole site on the mounting bracket.
2. After the product is fixed, it’s feasible to loosen the spin screws on the housing. Then, adjust the angle of the bracket. That is, adjust the installation angle of the light.
3. When the light is mounted, the wires and joints should be sealed off, to prevent electric leakage.
4. When power line is connected externally, it’s necessary to take corresponding waterproof and anti-leakage measures.
5. No fire safety rule can be violated when the light is in use.
6. Cut off power supply before and in installation process, and the light must be installed by a professional. The connection mode of 0.75-mm2 three-core cable: the red wire is live wire, blue wire is null wire and yellow wire is ground wire.
Features & Advantage:
1.High intensity, high resistance of shock or vibration
2. High efficiency up to 85%, 110lm/watt
3. Low illumination attenuation, 3% – 5% degradation/1kh
4. Long lifespan: 50,000hrs, 25 times more than normal energy-saving lamps.
5. Excellent heat dispersion, and low power consumption.
6. Easy installation, free maintanence.
7. High Power Factor: 0.85
8.No UV radiation
9.No mercury or other inorganics
10.Constant current to guarantee long life
Product detail pictures:
Related Product Guide:
15 Years Factory wholesale FN-H003 CE RoHS 120W SMD 2835 led warehouse lighting fixtures Factory in Provence , The product will supply to all over the world, such as: , , ,
Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.
In this addition of This Old Trailer we are going to wire up the lights on this trailer. Previously we had hooked up electric brakes and you can see, right now we have the junction box installed on there and we have wires ran for electric brakes. We have nothing for the actual tail lights themselves. That is what we are going to start on today. :30
We are going to hook up our 7-pole wiring harness with the molded connector, and we are going to hook that up to our junction box that we I installed on the frame. Inside the junction box the colors are labeled, so we will match the wires from the connector color for color with the junction box. :46
Now what we are going to do next is hook up our wires from the trailer into the junction box itself. Now there are some differences in the code, this is where you go by function not colors of the wire. Yellow is going to be the left turn on the trailer, and it is going to be red on our junction box. Right turn is going to be green on our trailer and that is going to brown on our junction box. Brown is going to be running lights on our trailer and that is going to go with green on our junction box. Now we can go ahead and secure all our connections with the hardware. All right, lets go ahead and run the wires down through the frame, back towards the tail lights. We will use the preexisting holes in the frame, and just take care when we go across the suspension components that we keep the wires out of the way so they do not get mashed between the axle and the frame itself. 1:45
Next we will go ahead and install the tail lights. We will start with the grommet, just install it in the bracket that is actually going to hold the tail light. Next we are going to install our wire harness, or also called the pig tail, into the tail light. These are somewhat keyed so you can not mess them up, they can only connect in one way. Just take time to make sure all the pins are properly lined up because it is kind of hard to push together, but if you have it perfectly straight it will go together like it is supposed to. It is a push fit, so it does not click and lock or anything. Then we can go ahead and install our light, just push that into the grommet itself. We will now start making our wire connections, and yes the wires will not match in color so we will have to go by function. We will start with our running light wire. Our trailer wire is going to be brown for the running lights, and then on the wire harness coming from the light, the black wire is going to be the running light circuit. We will go ahead and make that connection first. There is a variety of ways we could make this connection, in this instance we are going to go simple and use quick connects, but you can use a butt connector or any other type of connection. Our next connection we are going to make is for our right turn signal. That is going to be the yellow wire on the trailer and the red on the lights. Lastly, we will go ahead and make our ground connection. We will make the connection straight to the frame of the trailer. 3:28
[WWW.IJACC.COM] INDAH JAYA ACCESSORIES (IJA). One stop for CAR’S ACCESSORIES. We do ship outside of the country. https://www.facebook.com/ijakudus
Windshield Spray Nozzle On Hood Wiper Washer Eyes LED LIGHT BLUE & RAINBOW (2 PCS). UNIVERSAL
MAKE: CHROME & ABS PLASTIC.
COLORS: BLUE & RAINBOW (7 COLORS) LED light
SIZE: 3.7*2.2*1.5cm / 1.5*0.8*0.5in
IJA CODE: 1002674 & 1002675
Remove the original washer.
Choose a properly pad according to the hole of hood
Install blazing windscreen washer
Connect striped wire to anode wire of conrner light and black wire to ground wire.
Ues needle to adjust the spout angle
NOZZLE LIGHT TYPE R ( RAINBOW )
ITEM DETAIL = VARIASI NOZZLE YANG ADA LEDNYA
NYALA LAMPU RAINBOW
BERAT = 300g
IJA CODE ( 1002675 )
By from -
By from -