2 Years\\\\\\\’ Warranty for Professional High Quality FN-UG-B203 Solar IP 68 0.3w 3.7v Interaction LED Underground Light Low Consumption Factory from Guyana Factory in New York
2 Years\\\\\\\’ Warranty for Professional High Quality FN-UG-B203 Solar IP 68 0.3w 3.7v Interaction LED Underground Light Low Consumption Factory from Guyana Factory in New York Detail:
|Light Source:||LED||Item Type:||Underground Lights|
|Place of Origin:||Zhejiang, China||Brand Name:||FOND|
|Input Voltage( V ):||3.7||Lamp Power( W ):||0.3|
|Lamp Body Material:||Stainless Steel||Color:||Silver+ white|
|Lamp Luminous Efficiency
( lm/w ):
|30||Lamp Luminous Flux( lm ):||100|
|Working Temperature( ℃ ):||- 25, – 65||Pure white|
|CRI( Ra> ):||85||Solar cell:||Poly crystalline|
Packaging & Delivery
Packaging Details: on the customer request.
|Solar panel||1W, 17% efficiency||5 years|
|Li-ion battery||3.7V 2000mAh||500 cycles|
|LED||0.3W, 30lm, 2700K~6500K||50,000Hrs|
|Lighting mode||Bright and soft light|
|material||Aluminum Alloys + Stainless Steel|
|Solar charging time||11Hrs||1000W/m2|
|Lighting time||50Hrs||Full charged|
|Product size||Light:170*125*55||Unit: mm|
Product detail pictures:
Related Product Guide:
2 Years\\\\\\\’ Warranty for Professional High Quality FN-UG-B203 Solar IP 68 0.3w 3.7v Interaction LED Underground Light Low Consumption Factory from Guyana Factory in New York , The product will supply to all over the world, such as: , , ,
Splice Wires Fast & Easy, Yet Strong & Waterproof.
This is a super fast and easy way to join 2 wires together where you have a very solid good electrical connection and the electrical connection is protected from the rain and weather elements. If you use solder in addition to this and heat shrink tubing the wire repair or electrical connection will be as good as anything done in a factory. But even not using any solder you can make a solid strong electrical connection if you use the method in how you twist the wires together.
For optimum TurboCell operation and life, you will need to inspect your cell approximately every 3 months of operation, or 500 hours, and clean the cell if necessary. However, cell cleaning frequency is dependent on several factors; pH and calcium levels in the water are the two that have the greatest effect on how often the cell requires cleaning. Maintaining pH between the recommended levels of 7.2 to 7.8 ppm, as well as keeping the calcium level between 200 and 400 ppm should result in the cell only needing to be cleaned 3-4 times a year.
Watch this video and follow these simple steps to clean your Hayward TurboCell.
By from -
By from -