Good quality 100% Best Price on FN-UW-P804 FOND IP68 Ultra Flat Resin Filled Swimming Pool LED Underwater Light Supply to India in Saudi Arabia
Good quality 100% Best Price on FN-UW-P804 FOND IP68 Ultra Flat Resin Filled Swimming Pool LED Underwater Light Supply to India in Saudi Arabia Detail:
Our swimming pool light is used in underwater for swimming and spa pool
The material of the lamp is PC plastic which is anti-rust , anti-UV,corrosion resistance
And the lamp is filled with epoxy inside,which makes it 100% waterproof
Type | Power | Voltage | Luminous flux | Color temperat | IPRating | Light Angle | CRI |
white | 15w | AC12V | 1200LM | 2800,4500k,6500K | Ip68 | 120° | 80 |
white | 20w | AC12V | 1450LM | 2800,4500k, 6500K | Ip68 | 120° | 80 |
blue | 15w | AC12V | 160LM | Wavelength :465-475nm | Ip68 | 120° | / |
blue | 20w | AC12V | 225LM | Wavelength :465-475nm | Ip68 | 120° | / |
RGB | 10w | AC12V | 600LM | Ip68 | 120° | / | |
RGB | 16w | AC12V | 700LM | Ip68 | 120° | / |
Product detail pictures:
Related Product Guide:
Good quality 100% Best Price on FN-UW-P804 FOND IP68 Ultra Flat Resin Filled Swimming Pool LED Underwater Light Supply to India in Saudi Arabia , The product will supply to all over the world, such as: , , ,
In this video I explain/ show how I made a set of my LED flag poles or LED whips. The total cost for this is around $40-$50 depending on how good of quality flags you buy (if using for flags on a truck like mine). You should be able to make a set of these in 2 hours. It took me about 4 hours to make while filming it all and setting up the camera angles etc.
I hope you enjoy, if you have any questions feel free to ask and I will try my best to answer them all.
Don’t forget to SUBSCRIBE!!!!
https://www.facebook.com/ShortyzProductionz
http://www.youtube.com/Shortyjk95
http://www.youtube.com/ShortyzProductionz
HEAT SHRINK: http://www.buyheatshrink.com/heatshrinktubing/
LED’s : http://www.ebay.com/itm/5M-SMD-5050-RGB-LED-Strip-Waterproof-300-LEDs-Light-Flexible-60-M-IP65-12V-US-/201059509897?pt=LH_DefaultDomain_0&hash=item2ed014a689
LED Controller : http://www.ebay.com/itm/321697195709?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Video Links –
OVERVIEW video: https://www.youtube.com/watch?v=5ZgYv_4bp4Q
Tools/ Material Needed:
1 – Approx. 2x 6′ 1″ Diameter Poles (steel for strength)
2 – 15′ of CLEAR heat shrink (mine was 2″ but will vary depending on your pole diamter)
3 – 2x Multi color Waterproof LED reals (5m or 16ft)
4 – 36 amp IR controller
5 – 16 gauge 4 Conductor wire apprx 20ft
6 – Electrical Tape
7 – Heat Gun
8 – 2x 1in Flag pole mounts
9 – Varies bolts
10 – Zip Ties
11 – 2x 3′x5′ Flags
12 – Acetone
13 – 12v Switch
14 – Metal File
15 – Drill Bits
16 – Steel Plate
17 – Spray Paint
18 – Varies other tools noted in the video

