Lowest Price for Factory Supplier for New Delivery for FN-UW-P807 FOND IP68 Fountain Stainless Steel LED Underwater Light Factory for Slovakia in Venezuela Supply to Hungary

Short Description:

Details Light Source: LED Item Type: Fountain   Lights  Place of Origin:  Zhejiang, China  Brand Name:  FOND Input Voltage( V ):  12  Lamp Power( W ):  9/ 12 Lamp Body Material:  Stainless steel  Color:  white Lamp Luminous Efficiency( lm/ w )  55lm/w  Lamp Luminous Flux (lm)  1280 IP Rating:  IP68  Certification:  CE, RoHS Working Temperature( ℃ ):  -65 Color Temperature( CCT):  RGB, blue, warm white, pure white CRI( Ra> ):  80  Beam Angle( ° ):  45     Packaging ...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Lowest Price for Factory Supplier for New Delivery for FN-UW-P807 FOND IP68 Fountain Stainless Steel LED Underwater Light Factory for Slovakia in Venezuela Supply to Hungary Detail:

Details

Light Source: LED Item Type: Fountain   Lights
 Place of Origin:  Zhejiang, China  Brand Name:  FOND
Input Voltage( V ):  12  Lamp Power( W ):  9/ 12
Lamp Body Material:  Stainless steel  Color:  white
Lamp Luminous Efficiency( lm/ w )  55lm/w  Lamp Luminous Flux
(lm)
 1280
IP Rating:  IP68  Certification:  CE, RoHS
Working Temperature( ℃ ):  -65 Color Temperature( CCT):  RGB, blue,
warm white,
pure white
CRI( Ra> ):  80  Beam Angle( ° ):  45

 

 

Packaging & Delivery

Packaging Details: on the customer request.

Delivery Detail: 15 days receipt of the deposit.

 

Detailed Images

shtb (1).jpg

Specification 

Model No. FN-UW-F602
IP Rating IP68
Operating Voltage AC/DC 12V
Body Material Aluminum
Input Frequency (Hz) 50 ~ 60 Hz
Color Temperature (K) Pure White: 6000-6500K / Cool   White: 8000-12000K / Warm White: 2800-3000K
Wave Length (nm) R: 621-625nm / G: 518-520nm / B: 464-467nm
Beam Angle 15°/45°/60°for high power led, 120°for SMD/DIP led.
Constant Driver Yes
Over-current Protection Yes
Operating Temperature (℃) -20℃~ +35℃
RGB Control Methods Remote control / WIFI / DMX / External control
Lifetime 50,000 hours
Warranty Period 2 years
Remark

 

Product Effects

shtb (5)


Product detail pictures:


Related Product Guide:

Lowest Price for Factory Supplier for New Delivery for FN-UW-P807 FOND IP68 Fountain Stainless Steel LED Underwater Light Factory for Slovakia in Venezuela Supply to Hungary , The product will supply to all over the world, such as: , , ,


  • This instructional video will step you through the ballast bypass process to replace a traditional 400 watt metal-halide flood light with a more efficient 40 watt Star LED Semi-Corn Light. We removed the light housing to show you the process in a controlled environment. Here on our work bench, you can get a better close-up view of the process. You will want to flip the unit where you can access open the housing an easily access the electronics inside.
    Here you can see the traditional 400 watt metal-halide light bulb. Make sure that you have given the light sufficient time to cool down since these bulbs can reach over 500 degrees. Next, you will want to remove the aluminum reflector. The reflector helps amplify and spread the light. Finally, you will want to remove the insulation. In this unit, the insulation is a treated cardboard type material that has become dried out and brittle. Now you can see all the wires, the capacitor and ballast within the light unit. We take one last look at the metal-halide light bulb to get an idea of its size and fit. We now show you the replacement StarLED Semi-Corn Light Bulb. The back of the light bulb has aluminum fins to dissipate the heat from within the light bubs driver. You will also note that the light bulbs 120 volt to 277 volt AC requirement, output at 40 watts and the UL certification. From the back you can see the hot wire in, neutral wire and the ground wire. These wires go directly to the ballast. We are going to pull the wires back into the housing since we want to replace the power cable also. Note that the white wires go into the ballast and the green wire is grounded to the inside of the housing. Here we show you the new power cable with a black hot wire, white neutral wire and a green ground wire. We will push it through the back and into the housing. We want to replace the old wire nuts with new ones. We will fist connect the ground wires together. Next we will want to connect the neutral wire from the power cord directly to the white neutral wire going to the E39 socket. Finally, we connect the black hot wire to the wire directly attached to the E39 socket. Now that we have completed the ballast bypass part, we will re-assemble the flood light in reverse order. First we put back the insulated heat paper. Next we will want to put the aluminum reflector back into place. After that is done, we can screw in the new StarLED Semi-Corn light and angle the light by back turning it into place. We suggest that you replace the water tight rubber stripping before closing the housing. Now you are ready to re-install the flood light to the desired location. We invite you to check out all of our E39 socket high bay lights and corn lights at starledonline.com



    5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us