New Delivery for FN-S01-40 Solar 40W Integration Street Light Supply to Rotterdam

New Delivery for
 FN-S01-40 Solar 40W Integration Street Light Supply to Rotterdam

Short Description:

1. Energy-saving, environmental friendly, high efficiency;
2. Obtain the certificates of CE,ROHS,EMC,UL,DLC,SAA;
3. Long life, almost 50000hours;
4. Accept OEM ORDERS.

Product Detail

Product Tags

We always stick to the principle "Quality First, Prestige Supreme". We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for New Delivery for FN-S01-40 Solar 40W Integration Street Light Supply to Rotterdam, Looking to the future, a long way to go, constantly striving to become the all staff with full enthusiasm, one hundred times the confidence and put our company built a beautiful environment, advanced products, quality first-class modern enterprise and work hard!

Photovoltaic Solar LED street lights permit the creation, in areas lacking electrical supply, a lighting system that exploits solar energy, as an alternative to a 230V power supply, thus allowing quick installation of light sources and great versatility in street lighting systems.The new photovoltaic solar energy LED street light, thanks to a new light source realised with luminous diodes (LED), marks an important advance in autonomous lighting systems,introducing cost, efficiency and reliability standards that up until a few years ago were unreachable. 



Model FN-S01-40
LED Number 32units
Nominal Power 40W
Battery Spec. 30AH/12.8V
Solar Panel Spec. Monocrystal 75W /17.5V
LED Brand LG
Luminous Flux 4400lm
Light type 1s
CCT 3000K.4000K.5000K.5700K
Charge time 5-6 hours
Worktime at Energy
-saving Model(25%)
more than 40 hours
Discharge Temperature -20℃~+60℃
Charge temperature <60℃
Switch Lights Sense
on<=10Lxs,off >=15Lxs
mounting height 3-4m
space between light 12m
Pole Diamerter Fixture 40-60mm
warranty period 3 years


The unique characteristics of LED-light are the following:
1. WHITE light and thus an improved colour and detail perception to the human eye as opposed to yellow lighting
2. Possibility of guaranteed continuous light for an entire night
3. Very directional lighting and therefore reducing light pollution
4. Superior duration to any other type of filament or gaseous discharge lamp with a mean time before failure (MTBF) of approximately 50,000 hours
5. High level reliability as the light source is composed of an elevated number of independent units


Why are you choicing us?


Ningbo Fond-lighting Company Ltd. has advanced production equipment and testing instruments.

Right now, the new LED flood light and Led underwater light have successfully won a place in the market.

And, the products of our company has been approved by GS, CE, EMC, RoHS, REACH, PAHS, SAA, UL, DLC which is

surperior to the peer company. “High starting point, high quality, high pursuit” is our purpose.

The principle of our company is  providing  users with good quality products and prompt after-sales service in all



1. How about our company?

We have been specializing in LED flood light, LED high bay light, LED street light, LED underwater light, LED underground light for 10 years.

2. Do you accept OEM order?

Yes, OEM for our LED lights are acceptable.

3. How long is the delivery time?

It ‘s about 15-20 days.

4. What’s your payment terms?



  • Previous:
  • Next:

    Check out our new Facebook group:

    This video shows how to mount the 70mm round Led drl instead which replaces the fog lights. This 3W high power led unit has also a position light function. It dims when the low beam is turned on. The color temperature is around 5000K.

    This unit can be installed relatively easy, replacing the fog lights.

    0:12 First, remove the fog lights
    0:26 Place the wire harness in the car from left to right
    0:40 Connect the ring to ground
    0:50 Connect the yellow wire to the 12V source of the low beam. This will activate the dimming fucntion when low beam is switched on.
    1:03 Connect the white wire to a wire that gives 12 Volt when the ignition is activated
    1:28 If you need the pipe, first cut it and paint it in whatever color you prefer Than glue it to the fog grill
    1:45 Clean the surface where you will mount the DRL unit with double sided tape
    2:22 Place the projector, this may take some trial and error
    2:40 Remove the protecting foil from the lens
    2:51 Enjoy the result! Much brighter than dipped beam
    3:01 Dimming function for position light.

    mogul base 100w led corn bulb replace 400w HID MHL HPS, UL TUV certificate, widely used in supermarket, gas station, street light etc. It could be installed on the 8~12 meters tall fixture. More information, pls visit

    Send your message to us:

    • * CAPTCHA: Please select the Tree

    Related Products

    • * CAPTCHA: Please select the Flag

    WhatsApp Online Chat !