Online Manufacturer for Black Aluminum Waterproof Shell 120 Degree 2100lm Stadium 30W LED Flood Light For Buildings in Kuwait

Short Description:

Black Aluminum Waterproof Shell 120 Degree 2100lm Stadium 30W LED Flood Light For Buildings Setting Information Code FN101/FN102/FN103/FN104 Voltage 220V-240V/50-60Hz LED Type SANAN SMD2835 Efficiency 70 Lm/W CCT 3000-6500K Beam Angle 110° Material Die-casting Alu. Body + Glass Cover Warranty 2 Years   Product Description High Brightness Luminous efficacy > 70 lm/W; RA>70 Genius IP65 IP65 housing ensures low mainte...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Online Manufacturer for Black Aluminum Waterproof Shell 120 Degree 2100lm Stadium 30W LED Flood Light For Buildings in Kuwait Detail:

Black Aluminum Waterproof Shell 120 Degree 2100lm Stadium 30W LED Flood Light For Buildings

HTB195YbNXXXXXX7XXXXq6xXFXXX6.jpg

Setting Information

Code

FN101/FN102/FN103/FN104

Voltage

220V-240V/50-60Hz

LED Type

SANAN SMD2835

Efficiency

70 Lm/W

CCT

3000-6500K

Beam Angle

110°

Material

Die-casting Alu. Body + Glass Cover

Warranty

2 Years

  Product Description

HTB1iUW_NXXXXXcqXXXXq6xXFXXXG.jpg

High Brightness

Luminous efficacy > 70 lm/W; RA>70

Genius IP65

IP65 housing ensures low maintenance with
no need for internal cleaning resulting in a lower
total cost of ownership.

HTB1HaGxNXXXXXcAapXXq6xXFXXXV.jpg

HTB1g1S1NXXXXXaTXFXXq6xXFXXXO.jpg


Product Details

Using heat dissipation ribs, to be better heat dissipation performance.




Product Details

Easy installation and maintenance: Hypotenuse bracket design.

HTB13tWBNXXXXXb1aXXXq6xXFXXX9.jpg

HTB1_mmQNXXXXXX6XVXXq6xXFXXXc.jpg


LED Chips

High Heat Dissipation with using ceramic substrates.

HTB1mm5PNXXXXXcKXVXXq6xXFXXXe.jpg

FN101-10W

FN102-20W

FN103-30W

FN104-50W

15pcs SMD2835

28pcs SMD2835

56pcs SMD2835

56pcs SMD2835

700lm

1400lm

2100lm

3500lm

PF>0.5

PF>0.5

PF>0.9

PF>0.9

90*75*36mm

135*115*37mm

185*155*45mm

240*210*50mm

Applications

HTB1LG32MVXXXXccXFXXq6xXFXXXn.jpg

1. Replace of traditional incandescent lamp, CFL, halide lamp;
2. Lighting application for home, office, school, office, factories, entertainment locations like hotel, restaurant, shop, bar etc.
3. Lighting application for big buildings, playground, exhibition, garden, landscape, parth, parlour, ceiling, cupboard, floor, swimming pool etc.


Product detail pictures:

Online Manufacturer for Black Aluminum Waterproof Shell 120 Degree 2100lm Stadium 30W LED Flood Light For Buildings in Kuwait detail pictures

Online Manufacturer for Black Aluminum Waterproof Shell 120 Degree 2100lm Stadium 30W LED Flood Light For Buildings in Kuwait detail pictures

Online Manufacturer for Black Aluminum Waterproof Shell 120 Degree 2100lm Stadium 30W LED Flood Light For Buildings in Kuwait detail pictures

Online Manufacturer for Black Aluminum Waterproof Shell 120 Degree 2100lm Stadium 30W LED Flood Light For Buildings in Kuwait detail pictures

Online Manufacturer for Black Aluminum Waterproof Shell 120 Degree 2100lm Stadium 30W LED Flood Light For Buildings in Kuwait detail pictures

Online Manufacturer for Black Aluminum Waterproof Shell 120 Degree 2100lm Stadium 30W LED Flood Light For Buildings in Kuwait detail pictures


Related Product Guide:

Online Manufacturer for Black Aluminum Waterproof Shell 120 Degree 2100lm Stadium 30W LED Flood Light For Buildings in Kuwait , The product will supply to all over the world, such as: , , ,


  • High Power LEDs are very popular and low cost nowadays so I thought it would be a good idea to learn how control them with Arduino. So, I built a simple project that simply turns on a 4W Cob LED when the button is pressed. When the button is pressed again, the LED turns off. The LED is powered by 12V battery and it is controlled by the Arduino using a MOSFET. But let’s see how to build it.

    The parts needed in order to build this project are these:

    • An Arduino
    • A 4W Cob LED, or similar
    • A MOSFET module
    • A boost converter
    • A constant current driver
    • A pushbutton
    • 12V battery or power supply

    The cost of the project if you exclude the battery is about 10 Euros.

    ——————–
    WHERE TO BUY
    ——————–

    1. 4W COB LED: http://bit.ly/4W_LED

    2. Mosfet module: http://bit.ly/mosfet_module

    3. Boost Converter: http://bit.ly/Boost_Converter

    4. Constant Current: http://bit.ly/Constant_Current

    5. Cheap Arduino Uno: http://bit.ly/Cheap_Uno

    6. Push Buttons: http://bit.ly/100Buttons

    7. Small Breadboard: http://bit.ly/SmallBreadboard

    8. Siren: http://bit.ly/Siren_Small

    9. Multimeter: http://bit.ly/MultimeterMS8268

    10. Wires: http://bit.ly/WiresArduino

    Full disclosure: All of the links above are affiliate links. I get a small percentage of each sale they generate. Thank you for your support!

    Before we start, I would like to warn you, that you have to very careful when you are working with voltages over 12V. Misuse of tools or materials can cause injury and mismanagement of electricity can cause electric shock or explosion, I do not take responsibility for the consequences of making the projects shown in the videos from this channel, proceed at your own risk.

    This LED works best at around 15V. So in order to achieve that we have to rise the voltage of the 12V battery to 15V. For that we are going to use this boost converter module. With this potentiometer we can change the output voltage of it. I set it to 15V and we can move on.
    Next we have to limit the amount of current that runs through the LED in order to avoid overheating and destruction of it. In order to achieve that we are going to use this constant current and voltage driver. This module has three potentiometers. The first one sets the voltage limit. We set it to 15V using a Multimeter.

    Next we change the third potentiometer in order to set the current limit to 250mA. Be careful to set up your Multimeter correctly in order to avoid destruction of it. That’s it, if we now connect the LED to the battery via these two modules it will light up very brightly.

    But if we want to control the LED with an Arduino we are going to need the MOSFET module. Think of it, as a digital switch intended for high voltages and currents. This MOSFET module can handle up to 24V and 5A so it is well suited for this project. We connect the output of the constant current module to input of the module. Then we connect the LED to the output of the MOSFET module. Now all we have to do is to connect the MOSFET module with the Arduino Uno board in order to control it. The connection with Arduino is very easy. We connect Ground to Arduino Ground, Vcc to Arduino 5V and lastly we connect the signal pin to digital pin 10 of the Arduino Uno. Next we connect a pushbutton to Arduino. One leg of the button goes to GND and the other one goes to digital pin 2. That’s it. Now we are able to control the LED with Arduino. Be careful, this particular LED gets hot quickly, so we need a heatsink if we want to have it on for a long period of time. But we will get to that in a future video.

    ——————–
    CODE OF THE PROJECT
    ——————–

    http://educ8s.tv/arduino-4w-cob-led-tutorial/

    ——————–
    Physics Experiments Puzzle Game
    ——————–

    You can download my latest Android Game which is called Incredible Physics Experiments here:



    Overview of Sollos Landscape Lighting including why choose Sollos and the breadth of the product offering.


    5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us