Online Manufacturer for FN-H003 CE RoHS 120W SMD 2835 led warehouse lighting fixtures Factory from Paris
Online Manufacturer for FN-H003 CE RoHS 120W SMD 2835 led warehouse lighting fixtures Factory from Paris Detail:
FN-H003 CE RoHS 120W SMD 2835 led warehouse lighting fixtures
LED High Bay Light Features:
1.LED High Bay Light is the most strong product of FOND-LIGHTING;
2.Very complete certification: CE RoHS;
3.Widely sold to European market, north America, South America, Asia,etc.
4.Widely used in workshops, hotels, stadiums, gas stations, highway toll stations, supermarkets, exhibition halls and other indoor locations.
|The Specification of explosion-proof led light|
|Replace HID Lamp||70-100W||100-150W||200-300W||300-400W||400-500W|
|Net Weight||2kg (4.4lbs)||2.5kg (5.5lbs)||4.3kg (9.46lbs)||5.4kg (11.88lbs)||7kg (15.4lbs)|
|LED Power Supply||Mean Well driver or High quality driver|
|AC Input||AC85~265V (AC375V available on request)|
|DC Input||DC80~400V (DC12V, DC24V and other input available on request)|
|LED Light Source||Macro / Bridgelux / Epistar|
|Beam Angle||60° / 120° Both available|
|Color Rendering Index||≥Ra75|
|Housing||Copper Free Aluminum|
|Brand of Products||FOND|
Installation Process of led warehouse lighting fixtures
1. Fasten the light directly to mounting stem or mounting surface with screws through the 5-mm mounting hole site on the mounting bracket.
2. After the product is fixed, it’s feasible to loosen the spin screws on the housing. Then, adjust the angle of the bracket. That is, adjust the installation angle of the light.
3. When the light is mounted, the wires and joints should be sealed off, to prevent electric leakage.
4. When power line is connected externally, it’s necessary to take corresponding waterproof and anti-leakage measures.
5. No fire safety rule can be violated when the light is in use.
6. Cut off power supply before and in installation process, and the light must be installed by a professional. The connection mode of 0.75-mm2 three-core cable: the red wire is live wire, blue wire is null wire and yellow wire is ground wire.
Features & Advantage:
1.High intensity, high resistance of shock or vibration
2. High efficiency up to 85%, 110lm/watt
3. Low illumination attenuation, 3% – 5% degradation/1kh
4. Long lifespan: 50,000hrs, 25 times more than normal energy-saving lamps.
5. Excellent heat dispersion, and low power consumption.
6. Easy installation, free maintanence.
7. High Power Factor: 0.85
8.No UV radiation
9.No mercury or other inorganics
10.Constant current to guarantee long life
Product detail pictures:
Related Product Guide:
Online Manufacturer for FN-H003 CE RoHS 120W SMD 2835 led warehouse lighting fixtures Factory from Paris , The product will supply to all over the world, such as: , , ,
Brought to you by http://www.iJDMTOY.com
One pair of 6 Ohm 50W LED Load Resistors for LED Turn Signal Light Fix or LED License Plate Lights Error Fix.
These 6 Ohm, 50 Watt LED load resistors will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb (2 Amp load). This will solve LED related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. One LED resistor is required for each turn signal bulb or each license plate light bulb.
Connect one wire to ground and the other wire to the turn/brake wire. You can use the T taps so you do not have to cut your car’s wiring. One Load Resistor is required for each turn signal bulb. For more detail, please check Install LED Load Resistors.
Note: LED Load Resistor will get hot, therefore, please don’t mount the LED load resistors on plastic.
For more pictures and information about LED Load Resistor, check out the product page @ http://store.ijdmtoy.com/50W-Load-Resistor-Blinkers-License-Plate-Light-Fix-p/led_load_resistor.htm
Waterproof outdoor RGB 3in1/ RGBW 4in1 wall wash led bar light,led rgb wash light,theatre equipment
By from -
By from -