Online Manufacturer for FN-S01-10 10W Integration Solar Street Light Factory from Libya
Online Manufacturer for FN-S01-10 10W Integration Solar Street Light Factory from Libya Detail:
Photovoltaic Solar LED street lights permit the creation, in areas lacking electrical supply, a lighting system that exploits solar energy, as an alternative to a 230V power supply, thus allowing quick installation of light sources and great versatility in street lighting systems.The new photovoltaic solar energy LED street light, thanks to a new light source realised with luminous diodes (LED), marks an important advance in autonomous lighting systems,introducing cost, efficiency and reliability standards that up until a few years ago were unreachable.
|Solar Panel Spec.||Monocrystal 16.8W /18V|
|Charge time||5-6 hours|
|Worktime at Energy
|more than 40 hours|
|Switch Lights Sense
|space between light||12m|
|Pole Diamerter Fixture||40-60mm|
|warranty period||3 years|
The unique characteristics of LED-light are the following:
1. WHITE light and thus an improved colour and detail perception to the human eye as opposed to yellow lighting
2. Possibility of guaranteed continuous light for an entire night
3. Very directional lighting and therefore reducing light pollution
4. Superior duration to any other type of filament or gaseous discharge lamp with a mean time before failure (MTBF) of approximately 50,000 hours
5. High level reliability as the light source is composed of an elevated number of independent units
Product detail pictures:
Related Product Guide:
Online Manufacturer for FN-S01-10 10W Integration Solar Street Light Factory from Libya , The product will supply to all over the world, such as: , , ,
This is a rgb led covered swimming pool controlled by 2 rainbowduinos + Power Mosfet`s .Each led panel glass has 400 led and are controlled separately. The controller is entirely build by me, controled with Pixel Controller . The wiring and rgb leds were mounted by me, Milorad Ielin (Mylo) and a team of people. Enjoy
The WAL-TP-RPS-3XLED-CPR LED tripod light tower from Larson Electronics offers operators a lightweight and highly versatile portable lighting solution perfect for tasks that require quick deployment, easy transport, and a mobile power supply. The WAL-TP-RPS-3XLED is designed with a unique light assembly that consists of three light heads attached to a circular bracket and an articulated center support, allowing for a wide range horizontal and vertical positioning options. Powered by a rechargeable 12V26Ah lithium battery pack, this portable light unit delivers a robust 12,000 lumens and features a three way switch with high/middle/low settings as well as the ability to convert the beam angle from a powerful 120° spot beam to a 360° flood beam using a lens diffuser. Weighing only 23lbs, this 8.5′ self-contained light tower collapses into a compact cylinder form and comes with a convenient shoulder strap for transport.
The WAL-TP-RPS-3XLED-CPR is designed to give operators unrivaled control over their work space illumination, including light direction and breadth, light level, and beam type. This portable light tower features a unique LED light assembly consisting of three 9″L X 3.393″W light heads connected to a circular bracket. The three light heads can be moved individually on the circular bracket from a linear horizontal formation all the way around to a circular formation for 360° of illumination. The entire light assembly is mounted to an articulated center support and can be manually repositioned through 120 of vertical movement. This light assembly produces a powerful and focused 120° spot beam that can be converted to a 360 flood beam using a lens diffuser. In addition to the versatile light head and beam configuration, the WAL-TP-RPS-3XLED-CPR is equipped with a three way switch for high, middle, and low settings, allowing operators to choose the light level best suited to the task.
Using Cree T6 LED units specifically chosen for their high lumen per watt ratio and extreme longevity, the WAL-TP-RPS-3XLED-CPR puts out a remarkable 12,000 lumens of cool white light while drawing a modest 120 watts of energy. These Cree LEDs generate 100 lumens per watt effective lumen output, these Cree LEDs and have a 70% lumen retention at 50,000 hours, giving them better efficiency and operational life than traditional light sources.
Built for daily heavy duty use, the WAL-TP-RPS-3XLED-CPR is IP65 rated waterproof, impact and vibration resistant, and protected against ingress of dust and dirt. Each light head is housed within a rugged aluminum alloy body and protected behind a shatter resistant polycarbonate lens. Tough, durable design paired with advanced LED technology give this light a virtually maintenance free 50,000 hour rated lifespan.
LED Benefits: Unlike gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation and/or transportation. Instead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current is applied, providing instant illumination with no warm up or cool down time before re-striking. Because there is no warm up period, this light can be cycled on and off with no reduction in lamp life.
LED lights run at significantly cooler temperatures than traditional metal halide and high pressure sodium lights and contain no harmful gases, vapors, or mercury, making them both safer and more energy efficient. No extra energy is wasted in cooling enclosed work areas due to external heat emissions from bulb type lights, and the operator risks associated with traditional lighting methods, such as accidental burns and exposure to hazardous substances contained in the glass bulbs, are eliminated. In addition, LEDs are also safer for the environment as they are 100% recyclable, which eliminates the need for costly special disposal services required with traditional gas burning and arc type lamps.
Learn More: http://goo.gl/hRxfm2
By from -
By from -