Online Manufacturer for FN-S01-30 30W Integration Solar Street Light Manufacturer in Greece

Short Description:

Photovoltaic Solar LED street lights permit the creation, in areas lacking electrical supply, a lighting system that exploits solar energy, as an alternative to a 230V power supply, thus allowing quick installation of light sources and great versatility in street lighting systems.The new photovoltaic solar energy LED street light, thanks to a new light source realised with luminous diodes (LED), marks an important advance in autonomous lighting systems,introducing cost, efficiency and reliabi...


Product Detail

Product Tags

Related Video

Feedback (2)

, , ,
Online Manufacturer for FN-S01-30 30W Integration Solar Street Light Manufacturer in Greece Detail:

Photovoltaic Solar LED street lights permit the creation, in areas lacking electrical supply, a lighting system that exploits solar energy, as an alternative to a 230V power supply, thus allowing quick installation of light sources and great versatility in street lighting systems.The new photovoltaic solar energy LED street light, thanks to a new light source realised with luminous diodes (LED), marks an important advance in autonomous lighting systems,introducing cost, efficiency and reliability standards that up until a few years ago were unreachable. 

Specification

Model FN-S01-30
LED Number 15units
Nominal Power 30W
Battery Spec. 24AH/12V
Solar Panel Spec. Monocrystal 50.4W /18V
LED Brand LG
Luminous Flux 3300lm
Light type 1s
CCT 3000K.4000K.5000K.5700K
Charge time 5-6 hours
Worktime at Energy
  -saving Model(25%)
more than 40 hours
Discharge Temperature -20℃~+60℃
Charge temperature <60℃
Switch Lights Sense
   Threshold
on<=10Lxs,off >=15Lxs
mounting height 3-4m
space between light 12m
Pole Diamerter Fixture 40-60mm
warranty period 3 years

Features&Benefits: 
The unique characteristics of LED-light are the following: 
1. WHITE light and thus an improved colour and detail perception to the human eye as opposed to yellow lighting 
2. Possibility of guaranteed continuous light for an entire night 
3. Very directional lighting and therefore reducing light pollution 
4. Superior duration to any other type of filament or gaseous discharge lamp with a mean time before failure (MTBF) of approximately 50,000 hours 
5. High level reliability as the light source is composed of an elevated number of independent units

 


Product detail pictures:

Online Manufacturer for FN-S01-30  30W Integration Solar Street Light Manufacturer in Greece detail pictures

Online Manufacturer for FN-S01-30  30W Integration Solar Street Light Manufacturer in Greece detail pictures

Online Manufacturer for FN-S01-30  30W Integration Solar Street Light Manufacturer in Greece detail pictures


Related Product Guide:

Online Manufacturer for FN-S01-30 30W Integration Solar Street Light Manufacturer in Greece , The product will supply to all over the world, such as: , , ,


  • Brought to you by http://www.iJDMTOY.com

    Universal Fit Super Bright 8-LED Emergency Vehicle Strobe Warning Flash Light Kit (Amber + White Color, 3 Flashing Mode).

    For more information about our LED warning light series, please visit http://store.ijdmtoy.com/Vehicle-LED-Strobe-Warning-Lighting-Kit-s/21.htm



    Brought to you by http://www.iJDMTOY.com

    One pair of 6 Ohm 50W LED Load Resistors for LED Turn Signal Light Fix or LED License Plate Lights Error Fix.

    http://store.ijdmtoy.com/LED-Turn-Signal-Light-Rapid-Blink-Fix-Equalizers-p/aa1037.htm

    These 6 Ohm, 50 Watt LED load resistors will work on any vehicle and can be connected across the turn signal bulbs or License Plate Lights to simulate the load of a regular filament bulb (2 Amp load). This will solve LED related turn signal lights or license plate light problems such as hyper flashing, no flashing or burnt out bulb indications. One LED resistor is required for each turn signal bulb or each license plate light bulb.

    Connection Instructions

    Connect one wire to ground and the other wire to the turn/brake wire. You can use the T taps so you do not have to cut your car’s wiring. One Load Resistor is required for each turn signal bulb. For more detail, please check Install LED Load Resistors.

    Note: LED Load Resistor will get hot, therefore, please don’t mount the LED load resistors on plastic.


    5 Stars By from -

    5 Stars By from -
    Write your message here and send it to us