Renewable Design for Die-casting Aluminum Body 2835 SMD Outdoor LED Flood Light 50W in Kyrgyzstan
Renewable Design for Die-casting Aluminum Body 2835 SMD Outdoor LED Flood Light 50W in Kyrgyzstan Detail:
Product detail pictures:
Related Product Guide:
Renewable Design for Die-casting Aluminum Body 2835 SMD Outdoor LED Flood Light 50W in Kyrgyzstan , The product will supply to all over the world, such as: , , ,
—DISCLAIMER: I am not held responsible that you mess up on, this should just be used as a guide. If you have no knowledge in any electrical, I’d suggest some help from a friend or don’t even try —
It is very important that you disconnect the negative battery and make sure you do not work with anything plugged into the socket. Be careful not to short anything and wrap any exposed wires.. etc etc.
In this setup.. the footwell leds will only turn on when you open/unlock the car and fade off with the dome light. If you want to be able to turn them on manually, you can add a 3 pin switch to the setup.
By from -
By from -