How To Install Putco Pure LED Tailgate Light Bar



The Putco Pure LED tailgate bar

http://www.realtruck.com/putco-pure-led-tailgate-light-bars/

with bright and long-lasting LED’s and an easy installation this LED tailgate bar is sure to make people behind you jealous.
The Putco Pure Led tailgate bar has 2 sizes, mini, or a full size truck tailgate bar, and comes with red(brakes and turn signals) or a white/red(brakes, turn signals, reverse lights).
Comes with a limited lifetime warranty.

Stay Informed and Sign Up:

http://www.realtruck.com/newsletter-signup/

Subscribe to our Channel: http://www.youtube.com/user/RealTruckCom

Follow us on Facebook: http://www.realtruck.com/facebook/?ut…
Follow us on Twitter: http://www.realtruck.com/twitter/?utm…
Follow us on Google+: http://www.realtruck.com/gplus/?utm_c…

FREE SHIPPING

Give us a call at 866-262-3738

Video Transcription:
Hey guys, John here with RealTruck.com. Today I’m going to show you how to install the Putco Pure LED light bar onto this GMC Sierra. The really cool thing about this light bar is that it comes with everything you need to install it. There’s two options that you can go with here, either you can use sticky 3M tape-on stuff, which is what we’re going to use for application, or it also comes with these brackets and screws that you can attach these and clip it in place.

That’s going to require some drilling into your truck, and we don’t really want to drill into this new truck. We’re going to use the tape-on stuff and plug it right into our trailer wiring, because this has already a trailer kit on it. We have one extra wire that goes into our backup light, so we can hook that up.

First thing we’re going to do here is test fit this, to make sure where we’re going to want it, and start hooking this thing up. All right, looks good. Let’s go ahead, get the tape on this thing and get it installed up in here. We’ve got our 3M double-sided tape attached to our light bar, what we’re going to do is go ahead and peel all the tape off the back so we can put this thing on the truck.

We’re ready to install our light bar unto a truck. Something you want to pay a really close attention to is to make sure that you get this wiring harness onto the right side of your pick-up. If you don’t, when you turn you left side signal on, it’s going to flash on the right side back here. That just wouldn’t be cool, funny, but not cool.

The really neat features of this light bar is that it comes with a pre-installed four way flat connector, so if you already have a trailer wiring on your truck it’s just a matter of plugging this thing in. What we’re going to do is we’re going to put a little Dielectric compound on these, just to keep the water and moisture out of them.

We’ll plug her in here. We’ve got that plugged in, the next thing we’re going to do is go ahead and zip strip our wiring up underneath so it’s not all over. Then we’ll pull our taillight over here and attach our reverse light, so we get the full effect of this light bar.

So we can get the full function of our light bar, we’re going to have hooking up our reverse light to the reverse light of the pick-up. We could just use a scotch lock and put it on here. Find your reverse light, find your trigger wire, which in this one is the green one, and just go ahead and attach it. You can wrap all this with electrical tape, to get any moisture and such out of it.

Okay guys, there you have it. That’s how easy and simple it is to install the 60 inch Putco Pure LED light bar on your pick-up. There’s only one thing left to do, check how this thing works, and remember, until next time, happy motoring.


Post time: Oct-22-2017
INQUIRY NOW
  • * CAPTCHA: Please select the Car

WhatsApp Online Chat !